High Power 20-400kw Fast EV Charger DC Electric Vehicle Charging Station

• Customization: Available
• Installation: Floor Type
• Location: Private Use
• Model NO.: DC Charging Stations
• Number of Charging Interfaces: One Pile with Multiple Charges
• Start Mode: Credit Card Payment
• Transport Package: Wooden Box
• Origin: China

Product Description

Product Description

Dc fast charging pile bright point:

Fast charging speed
High voltage and high current output: DC charging pile can provide higher voltage and greater current, which can achieve fast charging.
Adaptive fast charging battery: Matched with the fast charging battery system of electric vehicles, it can make full use of the fast charging capacity of the battery and greatly shorten the charging time.
High charging efficiency
Reduce the conversion link: the direct output of direct current to charge the battery, reduce the loss of power conversion process, improve the charging efficiency, charging efficiency can reach more than 95%.
Intelligent charge management: Equipped with advanced charge management algorithm, the charging parameters can be dynamically adjusted according to the real-time status of the battery, such as power, temperature, voltage, etc., to ensure the charging process is efficient and safe, and extend the battery life.

 

Adapt to a wide range of scenarios
Suitable for high-power charging requirements: It is suitable for places that need to quickly replenish electricity such as highway service areas and urban fast charging stations to meet the fast charging needs of electric vehicles for long distances.
Strong adaptability to harsh environment: It has better protection performance in design, and can adapt to high temperature, low temperature, humidity, sand and other harsh environmental conditions, such as in
It can still work stably under the environment of -30ºC to 50ºC.

Good charging stability
High-precision power module: The use of high-precision power module, the output voltage and current are stable, small fluctuations, can provide a stable charging power supply for the battery, to avoid damage to the battery due to voltage and current fluctuations.
Real-time monitoring and feedback: with a perfect monitoring system, real-time monitoring of various parameters in the charging process, such as voltage, current, temperature, etc., and timely adjustment of the charging state through feedback control, to ensure the stability and safety of the charging process.

Multi-vehicle charging management is flexible
Multi-gun configuration: Many DC charging piles are equipped with multiple charging guns, which can charge multiple electric vehicles at the same time, improving the use efficiency and site utilization of charging piles.
Intelligent power allocation: According to the number of access vehicles and charging needs, intelligent power allocation to ensure that each vehicle can be charged in a reasonable time to avoid charging conflicts between vehicles.

 

Product model		20kW	30kW
Input characteristic	Input standard	Three-phase five-wire (A+B++C+N+PE)
	Input voltage	AC380V±15%
	Input frequency	45 ~65Hz
Output characteristic	Rated power	20kW	30kW
	Output voltage	DC200V-DC1000V
	Constant power range	300 ~ 1000VDC
	Single gun output current range	5 ~ 66A	5 ~ 100A
	Voltage regulation accuracy	≤±0. 5%
	Steady flow accuracy	≤±1%
	Ripple coefficient	± 1%
	Charging interface	1
	Measurement accuracy	Level 2.0
	Maximum peak efficiency	≥95% (More than 50% load)
Functional design	BMS secondary source	Standard configuration 12V
	Man-machine interface	4. 3-inch touch screen
	Charging mode	Automatic charging (APP or screen stop charging at any time)
	Charging mode	Scan code, swipe card, password
	Networking mode	Ethernet /4G
	Remote upgrade	support
Safety design	enforce standards	GB/T 18487.1 -2015 ,GB/T 20234.3-2015 , GB/T 27930-2015 ,JJG 1149-2022
	Safety function	Overtemperature protection, overvoltage protection, undervoltage protection, overcurrent protection, overload protection, short circuit protection, ground protection, environmental overtemperature protection, insulation monitoring protection, polarity reverse connection protection, lightning protection, emergency stop protection, leakage protection, communication fault protection, output contactor adhesion protection
Environmental index	Operating temperature	-30ºC ~ + 50ºC (Derating works above 50 ° C)
	Relative humidity	5%-95% no condensation cream
	Working altitude	≤2000m (Derating above 2000m is required), do not use this device in areas above 3000m
	Atmospheric pressure	70kPa-105kPa
	Class of protection	IP 54/IP 55
	Cooling mode	Air cooling
	Noise control	≤65dB
	Installation mode	Floor/wall hanging

 

Product model		80kW	120kW	160kW
Input characteristic	Input standard	Three-phase five-wire (A+B++C+N+PE)
	Input voltage	AC380V±15%
	Input power factor	≥ 0.99 (More than 50% load)
	Input frequency	45 ~65Hz
Output characteristic	Rated power	80kW	120kW	160kW
	Output voltage	DC200V~ DC1000V
	Constant power range	300 ~ 1000VDC
	Single gun output current range	5 ~ 250A
	Voltage regulation accuracy	≤±0. 5%
	Steady flow accuracy	≤±1%
	Ripple coefficient	± 1%
	Charging interface	2
	Measurement accuracy	Level 2.0
	Maximum peak efficiency	≥95% (More than 50% load)
Functional design	BMS secondary source	12Vdc
	Man-machine interface	Color display
	Charging mode	Automatic charging (APP or screen stop charging at any time)
	Charging mode	Scan code, swipe card, VIN start
	Networking mode	Ethernet /4G
	Remote upgrade	support
Safety design	enforce standards	GB/T 18487.1 -2023 ,GB/T 20234.3-2023 , GB/T 27930-2023 ,JJG 1149-2022
	Safety function	Charging gun over temperature protection, over voltage protection, under voltage protection, over current protection, overload protection, short circuit protection, ground protection, environmental over temperature protection, insulation monitoring protection, polarity reverse connection protection, lightning protection, emergency stop protection, leakage protection, communication fault protection, output contactor adhesion protection.
Environmental index	Operating temperature	-30ºC ~ + 50ºC (Derating works above 50 ° C)
	Relative humidity	5%-95% no condensation cream
	Working altitude	≤2000m (Derating above 2000m is required), do not use this device in areas above 3000m
	Atmospheric pressure	70kPa ~ 106kPa
	Class of protection	IP 54/IP 55
	Cooling mode	Air cooling
	Noise control	≤65dB
	Installation mode	Floor type

 

Product model		200kW	240kW	360kW	400kW
Input characteristic	Input standard	Three-phase five-wire (A+B++C+N+PE)
	Input voltage	AC380V±15%
	Input power factor	≥ 0.99 (More than 50% load)
	Input frequency	45 ~65Hz
Output characteristic	Rated power	200kW	240kW	360kW	400kW
	Output voltage	DC200V~ DC1000V
	Constant power range	300 ~ 1000VDC
	Single gun output current range	5 ~ 250A
	Voltage regulation accuracy	≤±0. 5%
	Steady flow accuracy	≤±1%
	Ripple coefficient	± 1%
	Charging interface	2
	Measurement accuracy	Level 2.0
	Maximum peak efficiency	≥95% (More than 50% load)
Functional design	BMS secondary source	12Vdc
	Man-machine interface	Color display
	Charging mode	Automatic charging (APP or screen stop charging at any time)
	Charging mode	Scan code, swipe card, VIN start
	Networking mode	Ethernet /4G
	Double charge	support
	Remote upgrade	support
Safety design	enforce standards	GB/T 18487.1 -2023 ,GB/T 20234.3-2023 , GB/T 27930-2023 ,JJG 1149-2022
	Safety function	Charging gun over temperature protection, over voltage protection, under voltage protection, over current protection, overload protection, short circuit protection, ground protection, environmental over temperature protection, insulation monitoring protection, polarity reverse connection protection, lightning protection, emergency stop protection, leakage protection, communication fault protection, output contactor adhesion protection.
Environmental index	Operating temperature	-30ºC ~ + 50ºC (Derating works above 50 ° C)
	Relative humidity	5%-95% no condensation cream
	Working altitude	≤2000m (Derating above 2000m is required), do not use this device in areas above 3000m
	Atmospheric pressure	70kPa ~ 106kPa
	Class of protection	IP 54/IP 55
	Cooling mode	Air cooling
	Noise control	≤65dB
	Installation mode	Floor type

Main product

Company Profile

Zhejiang Changzheng Electric Co., Ltd. (hereinafter referred to as "Changzheng Electric"), located in Yueqing Economic Development Zone, Zhejiang Province, covers an area of more than 15000 square meters and a building area of more than 27000 square meters. It is a comprehensive national high-tech enterprise dedicated to the research and development, operation, manufacturing, sales and service of two-grid electric equipment, charging pile infrastructure and electric power engineering construction. The company has always attached importance to independent research and development of products, and has obtained more than 200 patents with the strong support and advocacy of the company. The company has been committed to information and digital management, and the company's charging pile plate data platform "Changzheng Cloud Charging Data System" has obtained the computer software copyright.
The company's main products include primary and secondary integrated ring main unit (SF6, environmental protection), primary and secondary integrated pole-mounted circuit breaker, charging pile, intelligent distribution monitoring platform, low-voltage switch, high and low voltage switch cabinet, low-voltage cable branch box, metal (non-metallic) meter box, box type substation, JP cabinet, pole-mounted switchgear assembly, dry type transformer, oil type transformer, etc. The products are qualified suppliers of the National Grid and the Southern Power Grid. The enterprise has passed the type test, CCC and safety standardization certification of the National High Voltage Electrical Apparatus Quality Supervision and Inspection Center, passed the ISO9001, ISO14001, OHSAS18000, intellectual property management and other system certification, and has successively won the "High-tech Enterprise", "Top 50 Charging Industry in China in 2021". The technical standards of series of products are among the forefront of domestic peers, and it is a scientific research oriented green new energy enterprise with comprehensive competitiveness, forging ahead for the country's early realization of "peak carbon dioxide emissions and carbon neutrality".

Our Advantages

Certifications

Exhibition

Our Services

FAQ

Q:What is your terms of payment?
A:online fast payment,T/T

Q:Do you test all your chargers before shipping?
A: All major components are tested before assembly and each charger is fully tested before shipped

Q:How long to fully charge a car?
A: To know how long to charge a car, you need to know the OBC(on board charger) power of the car, the car battery capacity, the charger power. The hours to fully charge a car =battery kw.h/obc or charger power the lower one. For e.g, the battery is 40kw.h, obc is 7kw, charger is 22kw, the 40/7=5.7hours. If the obc is 22kw,then 40/22=1.8hours.

Q:Are you Trading Company or manufacturer?
A: We are professional EV charger manufacturer.